【China Building Materials】The construction technology of thermal insulation material consists of three parts: thermal insulation layer, anti crack protective layer and waterproof decorative layer. Among them, the insulation layer isRubber powdergatherbenzeneParticle insulationmortar;The anti crack protective layer is coated with alkali resistant fiberglass mesh cloth in the anti crack mortar waterproof layer is elastic;PrimerApply to the surface of the protective layercoatingAnd tile. The system is developed on the basis of the developed countries' cash slurry material and its application.

whyThermal insulation coatingGood prospects for development?
High temperature is the storage of chemical materialspotOne of the main reasons for the explosion, in order to prevent the explosion of chemical storage tanks, it is necessary to do a good job in chemical storage tank insulation.
In the construction industry, the building needs to consume a lot of energy during the use, mainly for heating,Air conditionerVentilation and lighting, hot water supply, cooking,Household Electric AppliancesAnd other aspects, accounting for about 30%~40% of human energy consumption, while the majority of heating and air conditioning. At present, most of the buildings in our country are non energy efficient buildings with high energy consumption, and the energy consumption per unit building area is about three times as high as that of the developed countries. Therefore, the problem of building energy saving has been paid more and more attention. As early as February 2000, the Ministry of Construction issued the "civil building energy management regulations," the ministerial order.
Domestic and international attention to the production of thermal insulation materials and the application in the building, and strive to reduce energy consumption, thereby reducing environmental pollution and greenhouse effect. At present, the global building insulation coating market is developing rapidly.
Developed countries pay attention to building energy efficiency and take some effective measures to achieve great results, so that the country's building energy consumption dropped significantly. Such as Denmark in 1985 than in 1972 heating area increased by 30%, but heating energy consumption was reduced by 3 million 180 thousand tons of standard coal. Heating energy consumption accounted for the proportion of the country's total energy consumption fell from 39% to 28%. Therefore, the development and application of building insulation paint more and more attention all over the world, actively develop green insulation materials products, processing prepared from raw materials, production and use of products and the requirements to maximize the conservation of resources and reduce the environment in Weihai. New thermal insulation materials continue to emerge.
China's urbanization process is advancing step by step, the construction of a large number of new buildings every year. In the current energy saving and emission reduction environment, building energy conservation has become the focus of attention of the community, the international policy measures have been introduced. Building energy efficiency is to reduce indoor and outdoor temperature transfer, that is, the internal and external building envelope insulation.
With the development of science and technology, all kinds of new materials have been used in the building. The building thermal insulation coating can not only solve the problem of heat preservation, but also reduce the cost of construction. Thermal insulation coating is a kind of special solution coating, thermal conductivity of 0.03W/m.K, just in the construction of the room with a thin brush 3mm, the winter indoor temperature can be increased above 3 degrees celsius. If the coating equipment, insulation suppression rate can be increased by 90%, energy saving rate of more than 80%; if there is a condensation of water on the place, can completely eliminate condensation; if the surface is painted with 1100 DEG C, can reduce the surface temperature of 1000 DEG C. In addition, insulation coating non-toxic tasteless, hardly produced any volatile substances, also has no flash point, not burning high security advantages not burst.
Insulation coating is a new coating products, in the more developed China's municipalities, provincial capital city and other economic regions, countries have mandatory requirements for residential or public buildings must be energy-efficient insulation, with energy-saving emission reduction efforts continue to increase the range of energy efficiency in buildings will continue to expand. Thermal insulation coating has broad market prospects, huge market space.